1997 nov 21 335 philips components product speci?cation er cores and accessories er9.5 core sets effective core parameters symbol parameter value unit s (i/a) core factor (c1) 1.67 mm - 1 v e effective volume 120 mm 3 i e effective length 14.2 mm a e effective area 8.47 mm 2 a min minimum area 7.60 mm 2 m mass of core half ? 0.35 g fig.1 er9.5 core half. dimensions in mm. handbook, halfpage cbw092 2.45 0.05 7.1 + 0.2 0 7.5 + 0.25 0 1.6 + 0.15 0 3.5 0 - 0.2 5 0 - 0.2 9.5 0 - 0.3 core sets for general purpose transformers and power applications clamping force 10 5n. core sets of high permeability grades clamping force 10 5 n, ?ux density 0.1 mt. grade a l (nh) m e air gap ( m m) type number 3f3 63 3% ? 84 ? 200 er9.5-3f3-a63-s 100 3% ? 133 ? 100 er9.5-3f3-a100-s 160 10% ? 213 ? 70 er9.5-3f3-a160-s 850 25% ? 1130 ? 0 er9.5-3f3-s 3f4 40 3% ? 53 ? 300 er9.5-3f4-a40-s 63 5% ? 84 ? 200 er9.5-3f4-a63-s 100 5% ? 133 ? 100 er9.5-3f4-a100-s 525 25% ? 700 ? 0 er9.5-3f4-s grade a l (nh) m e air gap ( m m) type number 3e5 3600 +40/ - 30% ? 4780 ? 0 er9.5-3e5-s 3e6 4800 +40/ - 30% ? 6380 ? 0 er9.5-3e6-s b ?
1997 nov 21 336 philips components product speci?cation er cores and accessories er9.5 properties of core sets under power conditions coil formers general data winding data for er9.5 coil former (smd) with 8 solder pads grade b (mt) at core loss (w) at h = 250 a/m; f = 25 khz; t = 100 c f = 100 khz; = 100 mt; t = 100 c f = 400 khz; =50mt; t = 100 c f = 1 mhz; =30mt; t = 100 c f = 3 mhz; =10mt; t = 100 c 3f3 3 300 0.015 0.025 -- 3f4 3 250 -- 0.024 0.038 parameter specification coil former material liquid crystal polymer (lcp), glass reinforced, ?ame retardant in accordance with ul 94v-0 ; ul ?le number e54705(m) pin material copper-tin alloy (cusn), tin-lead alloy (snpb) plated maximum operating temperature 155 c, iec 85 class f resistance to soldering heat iec 68-2-20 , part 2, test tb, method 1b: 350 c, 3.5 s solderability iec 68-2-20 , part 2, test ta, method 1: 235 c, 2 s number of sections winding area (mm 2 ) minimum winding width (mm) average length of turn (mm) type number 1 2.8 2.05 18.4 cpvs-er9.5-1s-8p b ? b ? b ? b ? handbook, full pagewidth ? 3.6 0.08 ? 4.45 0.08 ? 7.3 0.1 2 1.6 2 6 8.6 max. 0.7 2.95 0.1 2.05 min. 8.1 0.25 4.4 max. 1.6 10 cbw093 11.7 max. fig.2 er9.5 coil former (smd); 8-solder pads. dimensions in mm.
1997 nov 21 337 philips components product speci?cation er cores and accessories er9.5 mounting parts general data and ordering information item remarks figure type number clamp stainless steel (crni); clamping force ? 20 n 3 clm-er9.5 handbook, halfpage 9.8 4 5.5 cbw094 fig.3 er9.5 clamp. dimensions in mm.
|
